| AquaSPArkle Spa Rapid Shock is a fast dissolving granular chlorine product used for the oxidation of your spa water, eliminating bather wastes and contaminates. |
| | AquaSPArkle SPA FoamAway is a fast acting liquid used to prevent and destroy unsightly foam on the surface of the spa water. When added directly to the spa water, this product quickly breaks foam down which is generally created by detergents on bathing costumes, skin lotions and cosmetics. |
| | Use AquaSPArkle Instant Filter Cleaner as part of a regular cleaning routine for your hot tub filter cartridges. Instant Filter cleaner will rapidly remove grease and oil from the filter cartridges. Supplied with a convenient trigger spray application, this product is suitable for both Hot Tub and splasher pool cartridges. |
|
| ScaleAway will prevent scale deposits caused by mineral precipitation which can build up rapidly on spa surfaces due to high water temperatures. AquaSPArkle Spa ScaleAway should be used to help prevent scale deposits within the filter, heater, pipework and on spa surfaces. |
| | AquaSPArkle Spa Sparkle is a clarifier in liquid form that is used to make spa water look crystal clear. Spa Sparkle is added directly to the spa water with the pump running. Once applied it collects small particles and binds them together making larger particles that are much easier for the filter to remove. |
| | Clears and helps to prevent foaming in your bath spa tub
Gives Your water Clear and Crystal look
Instructions and warning should be carefully followed |
|
| Prevent the formation of scale on your spa with Fi-Clor Anti Scale. Anti Scale reduces scale formation and is compatible with all filters. Does the spa with Anti-Scale where there is good water movement, wait 10 minutes and then you can jump back in! |
| | The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle pH Minus is a granular acid used for lowering the pH if its above 7.6. |
| | The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2. |
|
| Ideal pool and spa pH levels are between 7.2 - 7.6, promoting bather comfort, plant/equipment protection and effective chemical use. Test the pH of your pool or spa water and if the pH is ABOVE 7.6,r then use ClearWater pH minus to decrease it. |
| | Ideal pool and spa pH levels are between 7.2 -7.6, promoting bather comfort, plant equipment protection and effective chemical use. Test the pG of your pool or spa water and if the pH is BELOW 7.2, then use the ClearWater pH Plys to increase it. |
| | Fi-Clor Spa pH & Alkalinity Reducer correct high levels of pH (above 7.6) or alkalinity (above 160mg/l). High pH and/or alkalinity can lead to problems with cloudy water and scaling of surfaces and pipework. High pH will make chlorine sanitisers less effective and high alkalinity can make it difficult to adjust the pH. |
|
| The Insta-TEST® 3 Plus pool & spa strip measures Free Chlorine 0-10 ppm, Bromine 0-20 ppm, Total Alkalinity 0-240 ppm, and pH 6.2-9.0. This test strip is a dip-n-read strip with instant results. Each bottle includes 50 test strips packaged in a waterproof blue PopTop bottle with a hinged cap. |
| | The Insta-TEST® 4 Plus pool & spa strip measures Free Chlorine 0-10 ppm, Bromine 0-20 ppm, Total Alkalinity 0-240 ppm, pH 6.2-9.0, and Total Hardness 0-800 ppm. This test strip is a dip-n-read strip with instant results. Each bottle includes 50 test strips packaged in a waterproof PopTop bottle with a hinged cap. |
| | The Insta-TEST® 5 Plus pool & spa strip measures Free Chlorine 0-10 ppm, Bromine 0-20 ppm, Total Chlorine 0-10 ppm, Total Alkalinity 0-240 ppm, pH 6.2-9.0, and Total Hardness 0-800 ppm. |
|
