| A powerful, fast dissolving oxidiser, High chlorine content – economical, Destroys swimmer wastes and helps prevent/kill algae, Stabiliser-free. |
| | Fi-Clor Spa Hardness Increaser is used to raise the calcium hardness level in spa water. Calcium hardness is the amount of dissolved calcium and magnesium in pool water. If there is insufficient dissolved calcium, it will be difficult to balance the water - there could also be grout loss in tiled spas. High levels are not a major cause for concern provided the pH and alkalinity are within recommended parameters, but the reading should be kept below 750mg/l (ppm) if possible.
|
| | AquaSPArkle Spa Rapid Shock is a fast dissolving granular chlorine product used for the oxidation of your spa water, eliminating bather wastes and contaminates. |
|
| Sunbeach Spas Rapid Shock is a fast dissolving granular chlorine product used for the oxidation of your spa water, eliminating bather wastes and contaminates. |
| | Removes all the chlorine and bromine from your Hot Tub or Pool with fast acting crystals. |
| | AquaSPArkle Spa Non-Chlorine Shock is a granular product that is ideal for regular oxidation of your spa water. As this doesn't increase chlorine or bromine levels, bathing can resume shortly after application. These granules can be used with both Chlorine and Bromine treated spas. |
|
| Aquablanc Spa A Combination Liquid is part of a non-chlorine active oxygen system used in conjunction with the Aquablanc Spa O2 Tablets. This dual-action treatment provides non-chlorine disinfection of your hot tub whilst promoting soft, gentle water. The Active O2 System requires a weekly dose (or weekly top up) with Spa A Combination Liquid combined with Spa O2 Tablets dosing via an appropriate floating dispenser prior to bathing (or otherwise weekly). |
| | Aquablanc Spa O2 Tablets are part of a non-chlorine active oxygen system, used in conjunction with Aquablanc Spa A Combination Liquid. This provides non-chlorine disinfection for your hot tub, whilst promoting soft gentle water. |
| | The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle pH Minus is a granular acid used for lowering the pH if its above 7.6. |
|
| The ideal spa pH level is between 7.2 - 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2. |
| | AquaSPArkle Spa Fusion is the ultimate product for regular oxidation of spa water. Supplied in a convenient 35g one-treatment sachet, Spa Fusion destroys bather wastes for an enhanced bathing experience, whilst a built-in clarifier helps to achieve sparkling clear spa water. To apply, simply cut the corner of the sachet and add directly to the spa water. |
| | If the calcium hardness of your spa water is less than 100mg/L it should be increased. AquaSPArkle Spa Hardness Plus is an effective product used for increasing calcium hardness levels within your spa water. |
|
| AquaSPArkle Spa T.A. Plus is a fine, rapid-dissolving powder used for increasing the total alkalinity of your spa water. Apply when total alkalinity falls below 80mg/l (ppm). |
| | Swimming pool calcium hardness levels should be maintained at a minimum of 200mg/l (ppm) to ensure that the pool and equipment are protected. Calcium Hardness Raiser is a calcium flake which rapidly increases calcium hardness to the desired level.
|
| | A traditional shock treatment product, these calcium hypochlorite granules have an available chlorine level of approximately 65% making them a good chlorine donor for pool water problem solving. |
|
